SUMITOMO Z2C adalah splicer fusi inti adaptif otomatis yang cepat, mampu dan praktis. Ini secara otomatis mengidentifikasi dan menyambung semua jenis serat (SMF, MMF, DSF, NZDSF, BIF). Waktu penyambungan: 6 detik, waktu pemanasan: 15 detik.

SUMITOMO Z2C dilengkapi dengan baterai berkapasitas tinggi, dan juga tahan debu, tahan air dan tahan guncangan (turun dari 76 cm pada 5 permukaan, tidak termasuk permukaan atas).


  • Waktu siklus penyambungan: 6 detik.
  • Waktu siklus pemanasan: 15 detik.
  • Identifikasi serat otomatis (SMF, MMF, DSF, NZDSF, BIF, lainnya).
  • Baterai tahan lama untuk 300 siklus sambungan & panas.
  • Kalibrasi busur otomatis.
  • Tahan debu, tahan air dan tahan guncangan.
  • Kompak & ringan (hanya 1,7 kg).
  • Operasi layar sentuh.
  • Meningkatkan perangkat lunak melalui web.
  • Pemeliharaan interaktif jarak jauh melalui web.
  • Dilengkapi dengan video pelatihan pengguna onboard.

Compact, Lightweight & Faster

  • 2.0kg with battery for 300 splice & heat cycles
  • Faster 6s splice in SM Quick Mode
  • Reduced 15s heat shrink time

Brand-new touch panel and UI

  • Wide and high resolution touch panel
    -5″ touch screen colour LCD display
  • Smartphone-like easy operation

Improved Environmental Durability

  • IPx2 water protection
  • IP5x dust protection
  • Splice at 50°C
  • Work at 6000m
  • 76cm drop on 5 faces

High Speed Oven

  • Fast-heating 15s
  • Productive
  • Programmable

Video Tutorial

Video tutorial to help splicing job


Optical Fiber Requirements
Materialsilica glass
Fiber Count / Profile TypesSingle / SMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657)
Fiber DiameterCladding diameter: 80 µm ~ 150 µm, Coating diameter: 100 µm ~ 1,000 µm
Cleave Length5~16 mm with coating clamp
Standard Performance
Splice Loss (typical)SMF: 0.02 dB, MMF: 0.01 dB, DSF: 0.04 dB, NZDSF: 0.04 dB
Return Loss (typical)≤60 dB
Splicing cycle time (typical)6 sec (SM G652 Quick Mode), 8 sec (Auto Mode)
Heating cycle time (typical)15 sec (FPS-61-2.6 sleeve, S60mm 0.25)
Splice & Heat cycles per battery full chargeapprox. 300 cycles
Fiber view & magnificationtwo CMOS cameras observation, 350X (zoom: 700X) for X or Y single axis view, max. 250X for both X & Y dual axis view
Proof Test1.96 – 2.09N
Applicable Protection Sleeve60 mm, 40 mm and Sumitomo Nano sleeves
Splicing programsmax. 300 (40 are pre-optimized, 260 editable by user)
Heating programsmax. 100 (23 are pre-optimized, 77 editable by user)
Splice image capture / Splice data storage 200 images / 10 000 splice data (internal memory only)
50 200 / 20 000 (with 16 GB SD card)
Universal clamps for 250µm, 900µm tight & loose buffer fiberProvided
Reversible coating clampsProvided
Onboard user training videoProvided
Automatic fiber identificationProvided (SMF / MMF / other)
Automatic arc calibrationAutomatically compensates for environmental condition changes
Display of remaining Splice & Heat cyclesProvided (Battery mode)
DC outputDC12 V (for JR-6)
USB portUSB 2.0 (mini-B type)
Storage mediaSD / SDHC memory card MAX 32 GB
Power Supply
AC input100 ~ 240 V, 50 / 60 Hz (ADC-16)
DC input10 ~15 V
Battery PackLi-ion 10.8 V, 6,400 mAh (BU-16)
Mechanical Parameters
Monitor5.0″ touch screen color LCD
Dimensions128(W) x 154(D) x 130(H) mm (without anti-shock rubber)
Weight1.7 kg (without battery), 2.0 kg (with battery BU-16)
Electrode life6 000 arc discharges
Operating conditionsAltitude 0~6,000 m, Temperature -10~+50°C, Humidity 0~95% (non-condensing), Wind velocity up to 15 m/s
Storage conditionsTemperature -40~+80°C, Humidity 0~95% (non-condensing), Battery -20~+30°C (long term)
Dust resistanceEquivalent to IP5x (Operates normally after 8 hours in a dust chamber (containing dust of particle size 25 µm or below)
Water resistanceEquivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°)
Shock resistanceDrop from 76cm on 5 faces (excluding top face)